Tag: Taylormade R7 Driver Adjustments

Taylormade R7 Driver Adjustments

Adding weight to the head of a golf club isn’t a new thought. To clubs, golfers attached pieces of tape for years to try and correct swing flaws. Club makers have taken the idea a step further designing clubheads with vents in. TaylorMade’s r7 Quad series comprises four weights — two more heavy weights and two lighter weights — which you are able to rotate, depending on the kind of correction you want to realize.

Taylormade’s golf clubs have a reputation for the quality that is great and a focus on the requirements of individual players. A number of their drivers feature flexible weights that players can use to alter the equilibrium of the club. Changing the balance, consequently, alters the payer’s swing, automatically correcting bad habits and making drives more accurate and longer. In essence, Moveable Weight Technology (MWT) gives each participant a custom-made driver, balanced just for his or her own swing.

Examples of how the weight methods work for two different drivers ought to help players decide if these systems are what they require. They use the exact same principle and they come with instructions, although the drivers that have MWT work differently. Taylormade has two lines of golf clubs, the Burner series and the R series. The Burn series is for novices and casual golfers and their designs are extremely forgiving of mistakes in procedure. The R series, however, is for more advanced players, for example professionals. MWT is one way.

This bar includes two weights of two sizes, each of which may go into any of four ports. If the heavier weights are in the toe, then that makes an otherwise directly golf ball fade, or curve to the right (for right-handed players). If the heavier weights are in the mind, that triggers a draw (a curve to the left( for right-handed players). The ball flies low, if both hefty weights are on the side. The ball flies high if they’re on the back. A fade is caused by 1 weight, at the toe at the front and one at the heel on the back. 1 weight, at the toe in the trunk and one in the heel in the front for a draw that is mild.

Using the Proper Equipment
Each R7 driver which has MWT comes with its very own torque wrench. Utilizing any other tool to loosen and tighten the weights in their ports risks damaging the weights. The other tool which is included with drivers that are R7 is the color wheel. The weights are color-coded, so the colour wheel shows how every colour settings affects the performance of that club. With the right color wheel, has all of the education required to use any of those MWT no matter how many weights and weight dimensions it has, drivers.

How can you fix the weights onto a TaylorMade driver?
– Eliminate around the driver’s bottom. There are just two yellow 2-gram weights along with 2 red 10-gram weights that could be installed in multiple combinations.
– To secure fade, install the weights on both positions that are outside closest to the toe of the bar. On the position, install one reddish weight and one yellow weigh for fade.
– Maximize the draw to secure more draw, install the 10-gram weights over both positions closest to the club’s hosel. For attraction, install a single weight onto the position and one red weight.
– Reduce the trajectory to acquire a trajectory, put the weights in the 2 positions closest to the surface of the club.
– To acquire a high trajectory, put the weights in the 2 positions furthest from the club’s surface.

Recent Posts


GiottoPress by Enrique Chavez